Home • Contact Us

Strat® Style Pick Guards

Strat® Style Pick Guards in this section are intended for an American or Mexican made Fender® Strat® style guitars. They are not intended for Squire® style guitars. If you have a Squire® or any other Strat® style knock off guitar please contact us.

Click Here to Configure It How You Want
this can be a little slow to load so be please be patient.

or
Please Read

This section has pre configured pick guards with additional options for:

• Material Selection
• Left or Right Handed
• Mounting Holes
• Bevel or No Bevel
• Template Option - if you are providing an original or tracing to duplicate

If you don't see what you are looking for then use the special instructions box to indicate modifications. There is no extra charge for an alternate configuration such as:

• Omitting certain components from any configuration.
• Mixing and matching pickups from one configuration to another.
• Using any switch configuration in the standard switch position.

If you request, in Special Instructions, that a component such as the switch or humbucker be moved to a specific location other than the stock location of the configurations you see on this site then there may be additional setup fees that apply.

In real simple terms, Yes I can probably make the configuration you want.

When it comes to pickups you don't see listed on my site then please provide accurate and specific dimensions or a direct link to the dimensions page on the manufacturers website. I will cut the pick guard to your pickups specifications.
       
    click the More Info. buttons for more options and prices
Click images below to see a larger view.
ST-BLNK
More Information		 ST-SASS-123SW
 ST-SASS-123TGL
 ST-SRASS-123SW
ST-XXX-XXXX
 ST-H1SS-123SW
 ST-H2SS-123SW
 ST-H3SS-123SW
ST-H1SH1-123SW
 ST-H1XH1-123SW
 ST-H1H1H1-123SW
 ST-H2SH2-123SW
ST-H2XH2-123SW
 ST-H2SRASRA-123SW
 ST-H2XSRA-X23TGL
 ST-H2XX-1BXXX


If you don't see the configuration you are looking for you may
be able to configure it the way you want here.
ST-P9XP9-1B23SW
      


SG44-ST11-SASS-123SW $48.00

Graphic Pick Guards
Satin Matte Finish Only

Contact Me


Understanding the item numbers

ST11-SASS-123SW

ST 11 SA S S 1 2 3 SW
STYLE MOUNT HOLES BRIDGE PICKUP MIDDLE PICKUP NECK PICKUP VOLUME POT TONE
POT		 TONE
POT		 SWITCH


Strat® Style Pick Guard Mounting Hole Options
• ST11 = Standard American or Mexican Made 11 mounting hole configuration.
• ST62 = Standard American or Mexican Made 62 Reissue 11 mounting hole configuration.
• ST8 = Strat ® Style 8 mounting holes

Pickup Options
• SA = Strat® style single coil with standard angle towards neck.
• SRA = Strat® style single coil with REVERSE angle towards bridge.
• S = Strat® style single coil.
• H1 = Standard Humbucker for a Humbucker with a cover.
• H2 = Standard Humbucker for a Humbucker with open coil non cover configuration. 2 mount holes.
• H3 = Standard Humbucker for a Humbucker with open coil non cover configuration. 3 mount holes.
• P90 = P90 pickup.
• S1 = Tele® style neck Pickup.
• MH1 = Mini Humbucker Pickup.
• BTS = Burns TriSonic Pickup.
• MH1A = Mini Humbucker Pickup with standard angle towards neck.
• BTSA = Burns TriSonic Pickup with standard angle towards neck.

Control Options
• 1 = Volume Pot Hole in standard #1 position
• 1B = Volume Pot Hole moved to accommodate P90 at bridge.
• 2 = Tone Pot Hole in standard #2 position.
• 3 = Tone Pot Hole in standard #3 position.
• SW = Standard 5 way switch slot.
• TGL = Gibson® style Toggle Switch.
• MSW = Three Mini Toggle Switches.

Floyd Rose® Strat® Style Pick Guard Mounting Hole Options
This section will be set up soon. For now you can order from the regular Guitar Pick Guard Category to configure the pick guard however you like.

Website Copyright © 2001-2009 Terrapin Guitars LLC & Terrapin Island Products